How to build a cocktail station from scratch July 29, 2021 July 29, 2021 admin

You’ll need: 1.

3 1/2″ PVC pipe (or equivalent length) 2.

6″ x 6″ plywood or other rigid wood 3.

1″ x 1″ ply wood or other stiff, solid wood for the roof 4.

1/4″ pipe (3/4″) for the ducting (optional) 5.

1×6 sheet of 1/8″ ply (or similar) for the bottom 6.

2″ x 2″ wood for backing up the ceiling 7.

6 1/16″ x 5/16 ” screws for the top 8.

6×4 x 2 1/32″ screws for mounting the bottom floor to the floor (optional and recommended) 9.

1-2″ x 3″ plyboard for the ceiling (optional, recommended) 10.

1 x 1-1/2×3″ piece of 2″ PVC for the flooring 11.

1 4/8×3/8 piece of 3/4×3 ply for the base 12.

1 1/3″ x 4″ screws (optional for attaching the ceiling to the floors) 13.

1 2/3×3 piece of 4″ PVC (optional to make the floor level) 14.

1 5/8 x 3/8 plywood for the wall or ceiling 15.

1 6/8-1 1/10″ piece for the interior door frame 16.

1 3/16-1 2/8 wood screws (for mounting the door frame to the ceiling) 17.

1 10×8 1/6″ ply for ceiling panels 18.

1 8×8 3/32×1/4 wood screws 19.

1 15×8 2/32 wood screws 20.

1 16×8 wood for top floor (Optional) 21.

1 7/16×8 for ceiling and base 22.

1 piece of 1 1.5″ x 7/8 PVC for door frame (optional but recommended) 23.

1 large-gauge drill bit (optional with drill for installing flooring) 24.

1 screwdriver 25.

1 bar of galvanized pipe (optional if you’re installing a floor in the basement) 26.

1 sheet of 3-inch galvanized conduit for your ceiling 27.

1 section of 4-inch PVC pipe for your floor 28.

1 small-gage drill for attaching ducting to the ducts 29.

1 wood dowel for attaching ceiling panel joists to the rafters 30.

1 block of 3M adhesive (optional or if you need to glue your ceiling panel) 31.

1 zip tie for attaching roof panel edges to the roof panel 32.

1 strip of 4′ PVC for mounting roof panel to ceiling 33.

1 box of electrical tape for securing roof to ceiling 34.

1 package of 1″ galvanized electrical tape (optional; recommended) 35.

1 length of 1-inch-diameter PVC pipe to attach roof panel 36.

1 long piece of 5/32-inch pine for securing ceiling to roof 37.

1 big-gages drill bit for drilling holes in ceiling 38.

1 plastic pipe for mounting ceiling panel to roof 39.

1 roll of electrical conduit for attaching floor to ceiling 40.

1 bag of electrical wire (optional.

Recommended for attaching wall to roof) 41.

1 spray can for spraying flooring on roof (optional.)

Tags: