In today’s post, we will talk about the building stations.
These are basically the different parts of a Taippower Building.
They are where the equipment is put together.
The main building is the core of the Taippowers operation.
The second building is where the power is generated.
You may notice that there are also a few power cables attached to the core.
These cables are actually a part of the power generation system.
Here is a look at one of the cable sections.
They are actually the power supply to the station.
If you look closely, you will notice that they are all connected by a thin wire.
There are two power lines running from the core to the power cables.
All power is then delivered to the control center via power cables to the main building.
As you can see, the power supplies are in an insulated structure.
Now, that is all you need to know about the Taipowers electrical system.
The building itself is built of concrete blocks that are insulated in a steel frame.
The frame is topped with a sheet metal roof.
Taippower buildings have four floors.
Each floor has four levels of floor plans.
On the ground floor, there are four levels.
This level is for the first and second floors.
It has two levels of seating.
And, on the third level, there is a reception area with a reception desk.
That is the third floor of the building.
You can see the top of the tower in the photo below.
In the corner, you can also see the main tower.
At the top, there will be a reception and power area.
We will also see an area for a kitchen, but that will be more on that later.
I hope you enjoyed this post.
Like this: Like Loading…